e3 e augat inc. 452 john l. dietsch blvd. attleboro falls, ma 02763 usa (508) 699-9800 fax (800) 533-2526 need more technical information? consult your local augat sales office listed on the back cover model type function act. code contact terminal model type function act. code contact terminal pg. m8 pg. m8 trd11d1(*)wl spdt on none on 1 gold wire lug trd13d1(*)wl spdt on none on 1 silver wire lug trd11e1(*)wl spdt on off on 5 gold wire lug trd13e1(*)wl spdt on off on 5 silver wire lug trd11f1(*)wl spdt on none (on) 1 gold wire lug trd13f1(*)wl spdt on none (on) 1 silver wire lug trd21n1(*)wl dpdt on none on 2 gold wire lug trd23n1(*)wl dpdt on none on 2 silver wire lug trd21p1(*)wl dp3t on off on 6 gold wire lug trd23p1(*)wl dp3t on off on 6 silver wire lug trd21r1(*)wl dpdt on none (on) 2 gold wire lug trd23r1(*)wl dpdt on none (on) 2 silver wire lug (*) specify rocker color by adding suffix number: (0) black (2) red, (6) blue (9) yellow, (on) indicates momentary position. dpdt
e4 e augat inc. 452 john l. dietsch blvd. attleboro falls, ma 02763 usa (508) 699-9800 fax (800) 533-2526 integral w/rocker (trd 1 only) e contact actuator l.e.d. l.e.d. model rating function actuator color terminal mount illumin. color *ul functions: silver only d, f, n, & r terminations functions only wl, ww or qc only single pole double pole 1 gold 0.4va silver 3a single pole on-on d on-off-on f on-(on) g on-off-(on) (on)-off-(on) h double pole on-on 2 0 6 9 black red blue yellow 2 wl wire lug ww wire wrap quick connect pc printed circuit 15/32" round hole 1/2" square hole 5 l lr beveled frame adaptor none option l bi-color red/green 2 red 4 yellow 5 green 25 3 1 trd1 rocker paddle r n p on-off-on on-(on) on-off-(on) s t (on)-off-(on) trd2 qc trd series rocker/paddle ? how to order typical performance characteristics: contact rating ...................... silver: 3a max. @ 125 vac, option 3 gold: 0.4va max. @ 20 vdc, option 1 initial contact resistance ..... 20 milliohms max. static withstanding ............... 15kv, per iec 801-2 insulation resistance ............ 1,000 megohms min. @ 500 vdc dielectric strength ................ 500 volts rms @ sea level electrical life 2 pos. 20k cycles @ full rated 3a load, 80k @ 0.4va, 3 pos. 10k cycles @ full rated 3a load, 60k @ 0.4va material specifications: movable contacts ................. copper alloy w/silver inlay contact or gold plate terminals/fixed contacts ..... copper alloy w/silver inlay contact or gold plate terminal seal ........................ epoxy housing/beveled frame ....... polyamide, black matte finish environmental specifications: operating temperature ......... -4 f to +176 f (-20 c to +80 c) storage temperature ............. -49 f to +199 f (-45 c to +93 c) solder heat resistance ......... meets mil-std-202, method 210 *notice: caution should be used when hand-soldering. solder heat resistance -550 -600 f for less than 5 seconds. solder with the switch in the closed position. ul recognized under the component program of underwriters laboratories inc. file #e46765 how to order actuators 2 1 .710 (18.0) .020 (0.51) typ. .100 (2.54) typ. .130 (3.30) 15/32-32 uns-2a thd. .507 (12.90) .265 (6.73) .550 (14.0) .345 (8.76) .750 (19.1) .130 (3.30) .150 (3.81) see pages m2-m4 for application specific indexing.
e5 e augat inc. 452 john l. dietsch blvd. attleboro falls, ma 02763 usa (508) 699-9800 fax (800) 533-2526 need more technical information? consult your local augat sales office listed on the back cover 0.4va max. @ 20 vdc movable contact: copper alloy, gold plate fixed contact/terminal: copper alloy, gold plate trd series .030 (0.76) w. .020 (0.51) thk. .200 (5.08) x .100 (2.54) typ. .018 (0.46) typ. wire lug wl qc wire wrap ww pc .040 (1.02)w .080 (2.03)l x oblong hole typ. .130 (3.30) .160 (4.06) .080 (2.03)w .020 (0.51) thk. x oblong hole typ. epoxy quick connect .110" (.020 thick) mates with standard .110" female connectors .280 (7.11) .160 (4.06) .080 (2.03) .095 (2.41) epoxy .590 (15.0) .030 (0.76) w. .020 (0.51) thk. .200 (5.08) epoxy x printed circuit .250 (6.35) .500 (12.7) recommended panel thickness: .030" to .250" one hex nut, one internal tooth lock-washer supplied. .472 (11.9) .125 (3.17) .472 (11.9 ) .472 (11.9) .440 (11.1) flatted .400 (10.1) slotted recommended panel thickness: .030" to .125" material: bright stainless steel to specify adaptor separately, use p/n trd10793 standard trd bushing will mount in any hole shown below. 15/32" hole standard 1/2" square cutout snap-in adaptor 5 how to order ? rocker/paddle (epoxy seal standard) terminations standard mounting dimensions apply, l.e.d. supplied in red, yellow, green, or red/green. l.e.d. specifications: max voltage: 2.8 vdc max. forward current: red-20ma, yellow-25 ma, green-25 ma, red/green-40 ma. 2 4 525 .550 (14.0) .070 (1.77) .150 (3.81) .820 (20.8) .200 (5.08) .100 (2.54) typ. .740 (18.8) .377 (9.58) .265 (6.73) .750 (19.1) .150 (3.81) .508 (12.9) 23 anode cathode .150 (3.81) .755 (19.2) .025 (.635) typ. .100 (2.54) typ. .715 (18.2) .840 (21.3) .377 (9.58) .345 (8.76) .130 (3.30) .040 (1.02) .065 (1.65) .080 (2.03) .078 (1.98) .080 (2.03) .006 (.152) .265 (6.73) .508 (12.9) 23 red cathode common green 15/32-32 uns-2a ul for contact option 3 rating: 3a, 120 vac(resistive) file: e46765 underwriters laboratories, inc. marking stamped under beveled frame. 3a max. @ 125 vac movable contact: copper alloy, silver inlay fixed contact/terminal: copper alloy, silver inlay 3 contacts/rating/ul recognition l.e.d. illumination - single and bi-color l.e.d. integral (rocker actuator) all spdt functions lr 1
e6 e augat inc. 452 john l. dietsch blvd. attleboro falls, ma 02763 usa (508) 699-9800 fax (800) 533-2526 functions single double 123 123 123 pole pole 456 456 456 d n on none on e p on off on f r on none (on) g s (on) off (on) h t on off (on) spdt terminals connected 2-3 --- 1-2 dpdt terminals connected 2-3 --- 1-2 5-6 --- 4-5 none no mechanical position off mechanical position, no electrical connection (on) momentary mechanical position, electrical connection switch guard 1. insert switch in panel. 2. attach lockwasher and hexnut. 3. snap switch guard onto switch. 4. tighten hex hut. .310 (7.87) .615 (15.6) .810 (20.5) .430 (10.9) to specify boot seal use p/n trd11494 trd series rocker/paddle ? how to order l material: nylon 6/6 color/finish: black, matte recommended panel thickness: .030 to .095" recommended panel thickness: .030 to .220: l.e.d. bevele frame adaptor (accepts rectangular l.e.d.) .225 (5.72) .773 (19.6) .500 (12.7) .550 (14.0) .050 (1.27) .200 (5.08) 1.100 (27.9) ref. l.e.d. .472 (12.0) .213 (5.41) .500 (12.7) .213 (5.41) dia. .500 (12.7) .500 (12.7) .250 (6.35) 15/32" hole standard 1/2" square cutout mounting rocker boot seal .160 (4.06) .760 (19.3) max. .410 (10.4) max. .660 (16.7) max. switch guard 3 4 2 1 nut panel trd. switch recommended panel thickness: 15/32" hole standard - .030 to .220 15/32" square cutout - .030 to .095 material: nylon 6/6 color/finish: black matte , specify separately, p/n trd10979
|
